@Stephan
I just wanted to know which part numbers I will need in order to fully fit the front and rear JCW bumpers including any supporting trim and brackets?
I have the following for the JCW side skirts:
51777382181 - JCW primed sill (left)
51777382182 - JCW primed sill (right)
51777352151 - JCW sill trim lower (left)
51777352152 - JCW sill trim lower (right)
51777361585 - JCW entrance cover
However, I am unsure about the front and rear bumpers?
The parts I have worked out so far are:
JCW Front:
51777382164 - JCW front bumper primed
51777382170 - JCW cover bumper front primed
51117360741 - JCW support fog lamp (left)
51117360742 - JCW support fog lamp (right)
51117360739 - JCW air inlet finisher (left)
51117360740 - JCW air inlet finisher (right)
51117360738 - JCW grid centre
51117365145 - JCW cover fog lamp (left)
51117365146 - JCW cover fog lamp (right)
Then I would also fit 51192339038 - JCW Pro larger front splitters.
Is anything else needed to fit this to the car??
[Blockierte Grafik: http://www.etk.cc/bmw/images_etk/B0073338.png]
http://www.etk.cc/bmw/EN/searc…per+S+B48/ECE/51/51_9307/
[Blockierte Grafik: http://www.etk.cc/bmw/images_etk/B0065362.png]
http://www.etk.cc/bmw/EN/searc…per+S+B48/ECE/51/51_9305/
JCW Rear:
For the rear, I have worked out the following:
51777382173 - JCW rear bumper primed
51127382174 - JCW tow eye cover primed
51127351655 - JCW grille bumper rear (left)
51127351656 - JCW grille bumper rear (right)
Then I would also fit part no: 51192339047 JCW Pro diffuser with additional JCW bigger lower wheel arch splitters.
Would I need any other parts?
[Blockierte Grafik: http://www.etk.cc/bmw/images_etk/B0065366.png]
http://www.etk.cc/bmw/EN/searc…per+S+B48/ECE/51/51_9309/
[Blockierte Grafik: http://www.etk.cc/bmw/images_etk/B0065368.png]
http://www.etk.cc/bmw/EN/searc…per+S+B48/ECE/51/51_9310/
As you can see in the diagram, there looks to be JCW specific mounting hardware for the bumper?? Also what is part number 7??