Codierung im MINI F54, F55 & F56: RPA, Licht bis hin zu SSA (Anwendung auf eigene Gefahr)

    Dann kan ja nix schief gehen :)


    Im Internet gibt es eine F56 Codinglist. Email hinschicken und du bekommst eine Liste: Habe ich mal angehängt.



    * Windows, sunroof close with keyfob lock/hold and/or comfort access button press/hold.
    (if you have power fold mirrors they will auto fold in on lock/hold, auto fold out on unlock)


    BDC
    3056 – KOMFORTSCHLIESSUNG_FB = Set Aktiv
    3056 – KOMFORT_SCHLIESSEN = Set Aktiv
    3110 – ASP_BEIKLAPPEN = Set Aktiv
    3110 – ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = Set Aktiv
    3110 – ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN = Set Aktiv



    * Tail lights turn on with day time running lights
    (DRL should be enabled in vehicle settings menu)


    BDC
    3062 – MAPPING_TAGFAHRL_1_H_L_OUTPUT = sl_l
    3062 – MAPPING_TAGFAHRL_1_H_R_OUTPUT = sl_r



    * Turn on door handle lights when reserve is selected


    BDC
    3070 – OVT_BEI_REUCKFAHRLICHT = Set Aktiv



    * Display Tire Pressure AND temperature in vehicle status menu


    HU_NBT
    3001 - RDC_SAFETY = Set Aktiv



    * Play ringtone from cell phone on incoming call


    HU_NBT
    3003 - INBAND_RINGING = Set Aktiv



    * Fog lights can be turned on with parking lights and remain on with high beams


    BDC
    3068 - NSW_EIN_AUF_LDS_STL>= Set Aktiv (allow on with parking lights)
    3068 - NSW_AUS_BEI_FL = Set Nicht Aktiv (remain on with high beams)



    * Turn off radio and nav system if equiped when drivers door is opened


    BDC
    3020 - TCM_LOGIC_R_OFF_DOOR = Set Aktiv



    * Play video on navigation screen while vehicle is in motion


    HU_NBT
    3000 - SPEEDLOCK_X_KMH_MAX = (Werte Value = FF)
    3000 - SPEEDLOCK_X_KMH_MIN = (Werte Value = FF)
    3000 - VIDEO_HANDBRAKE = Set Nicht Aktiv
    3000 - VIDEO_FRONT_LOCKED = Set Nicht Aktiv
    3000 - VIDEO_SPEEDLOCK_CONDITION = Set none



    * Remove the iDrive system startup disclaimer message


    HU_NBT
    3001 - LEGAL_DISCLAIMER_TIME = Set kein_ld



    * Disable seat belt disconnected reminder sounds


    ACSM
    3001 - SBR_PreWarning_Fahrer = Set Nicht Aktiv (front driver)
    3001 - SBR_PreWarning_Beifahrer = Set Nicht Aktiv (front passenger)



    * Disabled Active Sound Design (ASD)


    ASD
    3000 - Funktionen-Baureihe = Set to: F021


    HU_NBT
    3000 - ASD_SOUND_OFF = Set Aktiv



    * Change maximum radio volume upon vehicle start
    [^ 32 is the hex value for 50%, other hex values for example: 25% is 19; 75% is 4B)


    HU_NBT
    3002 - VOL_MAX_ON = (Werte Value = 32) ^



    * Unlock all doors with vehicle shutoff
    (only works when vehicle settings "lock all doors upon drive" away has been turned on)


    BDC
    3040 - VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = Set Aktiv



    * Change lane change blinker from factory 3 blinks
    (only works when vehicle settings "triple turn signal" has been turned on)
    (value is NUMBER+1, example below is 4 blinks)


    BDC
    3068 - BLINKZYKLEN_ANZAHL_TIPP = (Werte Value = 3)



    * Change Mirrors to auto Unfold automatically at set vehicle Speed
    (number is defined as a binary value; example below is 12 mph)


    BDC
    3110 - ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN = (Werte Value = 14)




    Vielleicht hilft es ja weiter :D

    Ich kann mir zwar nicht vorstellen, dass das so einfach ist, aber:


    Kann man diese übertriebene Knallerei im Sport-Mode wegcodieren? Ich hätte gerne die bessere Gasannahme + Lenkung OHNE künstliche Knallerei. Aber das wird wohl eher Wunschdenken sein? :D